Assembly table KomTec Universal GPM, timber frame construction
Sold
Assembly table KomTec Universal GPM, timber frame construction
Location:North Rhine-Westphalia, Germany
Description
with pneumatic clamping device.
The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,
ceiling and roof elements in timber frame construction.
- Heavy, basic construction of the machine frame
for a flat working surface.
- Clamping of the elements via 9 system clamping beams with pneumatic
pressure cylinders.
The system clamping beams are extendable for element heights from 100 to 3,800 mm.
The cylinder stroke is 320 mm, the clamping force per cylinder approx. 420 kg/4,200 N.
at 10 bar operating pressure
It can be clamped in two groups 5 pieces and 4 pieces,
so two elements can be clamped/worked at the same time.
- Planking of the working surface as far as technically possible with wooden boards.
(A perforated plate is available as an option, as shown in the photo) )
- Stop system at the bottom with 9 pins and at the side with 7 pins
for dimensionally accurate elements.
- Swivelling device of the assembly station via 3 hydraulic cylinders for
element weights up to 4,000 kg to 85° (95°).
The hydraulic system is compactly integrated in the frame area of the assembly station.
- The electrical control cabinet is also installed protected under the assembly station.
- The functions are operated via a control bottle.
- A compressed air connection and socket are installed at both station ends, and at the
and on the longitudinal side of the station there are 2 sockets and 2 compressed air
compressed air connections for coupling of hand tools are installed.
- The stations are built in a modular system,
so that they can be extended to a complete turning station
can be extended to a complete turning station.
Working area:
- Color RÁL 7035 light gray
Specifications
Condition | New |
Stock Number | 0,00 |
Product code | 3311204 |
Maximum element size (w x h) | 12.000 x 3.800 mm |
Minimum element size (w x h) | 1.000 x 100 mm |
Cylinder stroke of the clamping cylinders | 320 mm |
Stop bolt height | 120 mm |
Working height | about 700 mm |