Wide belt sander Bütfering SWT 325 QH

- Available from approx. September - 2023!

- Few operating hours Laboratory machine, was used for test purposes.

- Suitable for rough wood sanding, veneer sanding and high-quality intermediate lacquer sanding.

- Sanding belt motors with torque-dependent standby operation to reduce energy consumption.

- Workpiece thickness gauge ME 5000 with radio transmission of the measured

 to the machine incl. holder and charger.

 (All measuring devices installed as standard are omitted)

- Manufacturer Büftering 

- Type. Optimat SWT 325 QH

- Year of manufacture 2015

- Operating side left

1st unit:

- Cross belt with internal lamella belt

- Electronic sanding shoe, system MPS 2.0 Plus

- Sanding belt 5320x150mm

- Infinitely variable sanding belt speed 2-16 m/s

2nd unit:

- Super Finish Aggrgat

- Longitudinal belt with internal flap belt

- Automatic aggregate locking

- Electronic sanding shoe, system MPS 2.0 Plus

 High-precision workpiece recognition with 12.5mm grid. 

- Sanding belt 2620x1350 (1380)mm

- Infinitely variable sanding belt speed 2-16 m/s

- Sanding belt blow-off device, 5 steps, with low air consumption

- Motor power 22kW

3rd unit:

- Abrasive brush unit Brush divided into wire 600mm / brass 600mm.

 Diameter 150mm.

- Motor power 5,5kW

- Pneumatically controlled.

Workpiece cleaning unit:

- integrated, with ionisation and rotating

 air nozzles and antistatic

 brush at the outlet of the machine.

Further technical data:

- Workpiece thickness 3 - 160mm

- Height adjustment motorised

- Feed speed infinitely variable 2,5-13 m/s

- Vacuum conveyor belt

- Suction connection 2 x 160mm, 1 x 180mm

- Extraction capacity on site approx. 3280-3770 m³/h

- Exhaust air speed 20 - 23m/s

- Compressed air consumption 705 - 1105 l/min

- Weight 4,000 kg

- Location, in stock from end of September 2023

- Control cabinet integrated in machine

- Total connected load approx. 40 kW

- Volt, Hz 400/50

- Dimensions: Width: 2,100 x Length 2,115 x Height 2,180mm

- Extendable workpiece support roller with rubberised rollers at the

  infeed of the machine.

- Support table approx. 900 mm long with an integrated roller at the outlet

  (foldable) at the outlet of the machine.

POWERCONTROL control system with touch

- Uniform HOMAG Group user interface powerTouch

- Ergonomic touch operation with gestures, e.g. zooming,

 scrolling, wiping

- Simple navigation for uniform, intuitive machine operation

- Intelligent production readiness display via traffic light function

Explanation of how the sanding beam MPS 2.0 PLUS works

- Electro-magnetic link pressure beam

- High-precision workpiece recognition in a 12.5 mm grid

- Multiple loading even of complex part shapes

- Grinding pressures for workpiece edges, workpiece surfaces as

 well as on cut-outs can be set under program control

- Individual grinding pressure settings are stored according to application

- Dynamic pressure curve on workpiece leading and trailing edges

 Belt cleaning programme

After activating the programme, the machine automatically moves to 10 mm workpiece thickness and the blow-off

 rotors are activated. After complete cleaning of the feed belt, the machine moves

back to the initial value.